Sergers

The Best Serger Machine on the Market Today

Best serger machine for beginners

 

The Best Serger Machine on the Market

 

Thanks for stopping by our site. Today we are going to talk about the best serger machine on the market today, the Brother 1034D 3-4 Thread Serger. But first of all, we are going to give you some information on sergers. What is a serger? A serger is a sewing machine used for overcasting to prevent material from fraying at the edge.

If you turn almost any store-bought article of clothing inside-out to have a look at the seams, you’ll notice that they are not one line of stitching. In fact, it’s a wider row of loopy stitches using three, four or even five needles instead of one. Along with this complicated stitch, the fabric is precisely cut at the edge of the stitches. This kind of stiching is the work of a serger. A serger has a cutting blade next to its needles that clean-cuts the edges automatically as you use it.

Almost everyone knows about sewing machines but surprisingly, not many know about a serger. Many people have sewed all their life without using a serger, although it is a popular sewing device and a well-known companion of your sewing machine. A serger, when used with the sewing machine, brings sewing to a whole new level. Sergers are known to produce clean, decorative seams like the ones you see in the market. They can quickly repair torn seams as well as work really fast. A Serger can help you make any piece of clothing, be it pants or pajamas in a short duration of time. Although you might not find a serger difficult to use in the beginning, once you understand how it works, it will be a piece of cake. Keep reading to see why we find the Brother 1034D 3-4 Thread Serger Machine to be the best serger machine on the market.

      Our Top Pick--The Brother 1034D 3-4 Thread Serger     

Of all the sergers we have used, the Brother 1034D 3-4 Thread Serger is the cream of the crop!! We love the way it performs. It is perfect for beginners.    

Best Serger Machine

What is the Difference Between a Sewing Machine and a Serger?

Many individuals are probably asking, what is the difference between a sewing machine and a serger? Well, sewing machines and sergers are extremely dissimilar. However, they complement each other at the same time, while being very much alike. Nevertheless, there are quite a few differences.

Needles

First, let’s just mention that sewing machines and sergers are able to use as a minimum of two needles. Different from sewing machines, serger machines lack bobbins. In its place, these sergers have what are called loopers. You are probably asking what are those, right? Well, loopers are those parts of the apparatus that work with the needles to bolt the threads as one and accompany with the needle or needles to create other stitches.

Functions

If you were in a store or online shopping, you would probably buy the serger, especially if you are interested in doing some creative things with clothing. This is because serger machines are unique when compared to sewing machines. Sergers are able to perform three functions at once. A sewing machine is only able to accomplish one thing at a time.

Seam Allowance

Seams are one of the biggest differences between sewing machines and sergers. For one, a sewing machine produces a stitch that clutches two cloths together. If you were to observe closely, the incorrect side of the seam, however, you’ll notice these irritating little waste bits. These little scraps are named seam allowances. The issue with seam allowances for sewing machines is that most fabrics will unravel around the edges. Who wants that? For the most part, you’ll see a bunch strings hanging out. Strings hanging all over the place is something you’ll see constantly with sewing machines. Mostly, the border of your seam allowance will come apart all the way to the stitchline and your dress will break up. Now, on a sewing machine, there are so many ways of handling seam allowances on a sewing machine, then you would on a serger, only because it would serve a different purpose.

Purpose

Speaking of the serger and its purpose, the thing that sets it apart from a sewing machine in dealing with the trouble of seam allowances is that the serger is recognized as a “finishing” device. Initially, the serger’s knife cuts a clean edge on the cloth. After that, it’s numerous threads start wrapping around the raw edge of the fabric. At the same time, it starts to enclose it and making sure that it won’t become ragged. The beauty of using the serger in handling seam allowances is the result is a seam that is “nice-looking” and has a smooth look to it. The job of a serger is that it can also create a very narrow rolled hem, unlike a sewing machine. Basically, sergers produce seams and finish edges minus extending fabric, even lightweight braids! This is very hard to accomplish with a sewing machine.

Stitches

Absolutely, a serger is exciting to use, given that it has constantly been looked at as a “fun” sewing machine that has restricted and high-class, and very significant, purposes. Nevertheless, there are still some things that one can do that the other can’t or maybe, it can be said there are some jobs that are done better on one than it is the other. Stitches happen to be one of those things. Sewing machines are popular with the chain stitch method. This is something that was utilized on the earliest sewing machines and included only one hooked needle and one thread that imitated a hand stitch. Though scientifically cutting-edge at the time, the chain stitch wasn’t much of a hit because it was weak. To add more fuel to the fire, it could only be used for straight lines, so not long after, it was replaced with the lock stitch method. However, the point of this story is just making the point that the lock stitch method is something only a sewing machine can do.

Lock stiches

Lock stitch machines are basically sewing machines that we grew up with. They are in most people’s homes today. This stitching method on the machine uses a metal bobbin and it normally sits on the stitch plate. At this position, it holds a small coil of the thread, while another coil of thread sits on the sewing machine. This thread is on top passes through a tension mechanism. Once there, it moves through the eye of the sewing machine needle. Now, the serger is not equipped with anything like this. Continuing to boast the uniqueness of the sewing machine, it needs to be added that the needle on it pierces the fabric and from there, pulls the “top” thread underneath the stitch plate. However, it does not stop there because it immediately clutches the “bottom” thread from the bobbin, and then at this point, “locks” both fabric and threads together.

Loopers

Now, the serger does do a little stitching but is certainly no match the sewing machine. However, let’s not be too hard on it. You would learn that the serger completes the edges of fabric much better than a regular sewing machine. Other things that set it apart from the sewing machine is that it uses built in scissors to cut extra, and a sophisticated looping technique that leaves hems clean, strong, and refined. Unlike a sewing machine, the serger uses somewhere around one and six thread cones. Now this depending on the desired stitch of course. The thread cones support “loopers” which twist thread that moves through the needle and around the fabric edge, covering it completely. Different from the sewing machine, sergers are high-speed machines, ideal for stitching in a more advanced way.

Buttons

Even though the seger is a fun machine to use, it does not do simple things such as create buttons. The sewing machine does it with no problem. In the past, the have been cases where the buttonhole was tried with the serger but it was not effective. In the end, it only created problems.

Here is a nice video showing the difference between a sewing machine and a serger:

 

Now, we are going to review our top pick for the best serger machine on the market today, the Brother 1034D 3-4 Thread Serger.

Best Serger Machine for Beginners

Features

Still wondering if the Brother 1034D 3-4 Thread Serger is right for you? It doesn’t matter whether you’re looking for great quality or easy stitching, this serger machine does it all. Here is a look at some of its features that make this the best serger machine on the market today.

-Gives a Professional Edge Finish on a Wide Range of Fabrics.

-Has 22 built-in stitch functions with 4-thread overlock, 3-thread overlock, narrow, rolled hem and ribbon locked stitches with special functions for producing decorative looks.

-It is easy to thread, learn and use. You won’t find the learning curve difficult and can get started right away, making this machine perfect, even for beginners.

-It is reliable and gives high performance.

-This package comes complete with two, snap-on feet, a foot controller, a soft cover, and needles. (It uses standard sewing machine needles.)

Best Serger for Beginners

Pros:

-The product can create clothing pieces like the ones found in stores, as the Brother 1034D 3-4 Thread Serger delivers a professional edge finishing on a wide range of fabrics, including knits, linens and formal wear. It also creates ruffles, decorative edges, gathers, joins laces, narrow sleeves and even spaghetti straps. This are just some of the reasons we rate the Brother 1034D as the best serger machine on the market.

-It works fast.

-Provides different kinds of stitches.

-Comes with a user manual and videos.

 

Cons:

-Learning the different kinds of loopy stitches can be challenging and it usually takes time to pick up the different techniques.

-There are four or five threads in a serger, which has to be adjusted manually. Adjustments can be complicated.

 

Helpful tips:

-You should go through the user manual and watch videos provided to learn about the device. This should help you to overcome the challenges you face.

-The best advice is to master one or two basic things with a serger and then move on to the difficult ones.

 

Summary:

Everybody loves sewing machines and needs one in their home. It doesn’t matter whether you have your own tailor, it is a good idea to have a sewing machine in your home. It could be that you have an important meeting and your shirt button becomes loose, or perhaps you want a creative hobby to spend your time during winter months. This sewing machine can help you do all that, and more.

Sergers are sewing devices which use multiple spools of thread ranging from three to five threads to produce decorative stitches. If you look carefully, a serger is much more than a sewing machine because a sewing machine uses only one spool. A serger is known for making stitches with needles and loopers, neatly cutting away the excess fiber in an extremely fast way. This is why it is known for producing professional work.

Most Common Serger

The most common and also the most basic stitch is the three-thread overlock. On adding another needle, you get the four-thread overlock which is a sturdy stitch. This is often used in making decorative cloths and clothes. Expensive sergers have the ability to do five-thread safety stitches along with a cover stitch. A serger can perform different varieties of stitches. Some of them include rolled hem, chained stitch, elasticated applications, flat lock seams.

Serger overlock stitches have built-in elasticity that make them a natural fit with knit fabrics.

 

Verdict:

Honestly, a serger is not something a beginner needs. It is for professional sewers. The usage of a serger is basically the stepping stone to professional sewing. It is a must if you are into sewing. Once you start using a serger, you would not want to go back to your sewing machine.

In a nutshell, the Brother 1034D 3-4 Thread Serger is a great product to buy if you are looking for a financially affordable, low-budget, straight serger that can provide high-end performance with less noise, which is ideal for in-home use. It is also the best serger machine on the market today. As we saw earlier, it provides excellent results with light and moderate-weight fabrics and could also be used with thick fabrics. It a definitely best in market sewing machine for both hobbyists and professionals.

The Brother 1034D 3-4 Thread Serger gives you a variety of options and you can sew fashionable clothes in a really short period of time. In this way, you can even recreate a design you have come across in a shop without spending as much money. If you already use a sewing machine, this serger sewing machine is a must in your home. This machine is highly recommended for it’s outstanding results and notable efficiency. This is why we chose the Brother 1034D 3-4 Thread Serger as the best serger machine on the market today.

Here is a quick video on the Brother 1034D 3-4 Serger–The Best Serger Machine on the Market!!!

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*